The Ultimate Guide to Disassemble Sleep Number Bed

Last updated on August 23rd, 2023 at 08:24 am

Don’t know how to disassemble Sleep Number bed? Don’t worry, this ultimate guide to disassembling the Sleep Number bed will help you!


A good night’s sleep is essential for a healthy and productive lifestyle. When it comes to getting the best sleep, there is nothing better than a Sleep Number bed. Using this high-tech mattress, you can adjust the firmness and support to your personal preference.

However, what if you need to move or replace your Sleep Number bed? The disassembly of it can be a daunting task, especially if you are not familiar with its structure. You need not worry, as in this article, we will guide you through the process of disassembling your Sleep Number bed step-by-step.

Step-by-Step Guide to Disassemble Sleep Number Bed

The process of disassembling your Sleep Number bed may seem difficult, but it is not that difficult. A little patience and the right tools are all you need. To disassemble your Sleep Number bed, follow these simple steps:

Step: 1 Unplug and Depressurize

First things first. Safety is paramount.

a. Unplugging the Bed

Unplug the bed from the wall, ensuring there’s no electricity running through.

b. Depressurizing the Air Chambers

Using the remote, set the Sleep Number to 100, which fully inflates the air chambers. Then, deflate them entirely. This step helps protect the inner components during disassembly.

Step: 2 Dealing with the Air Chambers

These chambers are the heart and soul of your Sleep Number bed, so handle with care.

a. Detaching the Hoses

Each air chamber has a hose attached. Gently disconnect these from the pump.

b. Removing the Chambers

With the hoses detached, the air chambers can be lifted out. If there’s any resistance, check for any missed connections.

Step: 3 Handling the Firmness Control System

This is the tech hub of your Sleep Number bed.

a. Locating the System

The Firmness Control System is usually housed in a corner of the base.

b. Disconnecting and Removing

Detach any connected hoses and unplug the system from the power source. Lift it out and pack it securely.

Step 4: Gather the Required Tools

 Disassemble Sleep Number Bed
Disassemble Sleep Number Bed

It is necessary to gather the necessary tools to disassemble your Sleep Number bed. You will need the following tools:

  • A flathead screwdriver
  • A Phillips screwdriver
  • Pliers
  • Allen wrench
  • Hammer
  • Tape measure

Ensure you have all the necessary tools before you begin disassembling your Sleep Number bed.

Step 5: Remove the Mattress

When disassembling a Sleep Number bed, the first step is to remove the mattress. The following steps should be followed to accomplish this:

 Disassemble Sleep Number Bed
Disassemble Sleep Number Bed
  1. Deflate the mattress using the remote control. Before you begin, ensure that the balloon has been completely deflated.
  2. Unzip the mattress cover zipper. On the side of the mattress, you will find it.
  3. The mattress cover should be removed and set aside.
  4. Place the mattress in a safe and secure location after removing it from the base.

Step 6: Remove the Base

It is now time to remove the base once you have removed the mattress. Here is how to do it:

 Disassemble Sleep Number Bed
Disassemble Sleep Number Bed
  1. The first step is to remove the corner brackets that hold the base together. This can be accomplished with a screwdriver or pliers.
  2. The next step is to remove the screws that hold the base legs to the frame. For this purpose, a Phillips screwdriver should be used.
  3. Remove the headboard and footboard base frame once the legs have been detached.

Step 7: Disassemble the headboard and footboard

Now that you’ve removed the base, it’s time to disassemble the headboard and footboard. Here’s how:

 Disassemble Sleep Number Bed
Disassemble Sleep Number Bed
  1. Remove any screws or bolts that hold the headboard and footboard to the base.
  2. Remove the headboard and footboard from the base with care.
  3. Use a hammer or screwdriver to remove the headboard and footboard if they are attached to the wall.

Step 8: Pack the Parts

When all the parts have been disassembled, it is time to pack them for moving or storage. The following tips will assist you in packing the parts:

 Disassemble Sleep Number Bed
Disassemble Sleep Number Bed
  • Measure the parts using a tape measure. As a result, you will be able to select the right size of boxes for packing.
  • Protect the parts during transportation by wrapping them in bubble wrap or packing peanuts.
  • Please label each box with the name of the part and the room to which it belongs. You will find this helpful during the reassembly process.

Transport Tips

Keep Components Together

It’s easy to lose screws or small parts. Use zip-lock bags and label them.

Protect the Mattress

When moving the mattress, consider using a protective cover to avoid dirt and damage.

Reassembling Tips

While this guide focuses on how to disassemble a Sleep Number bed, remember that reassembly is essentially the process in reverse. However, always refer to the manufacturer’s instructions when putting the bed back together.


Can I disassemble my Sleep Number bed without professional help?

It is possible to disassemble your Sleep Number bed without the assistance of a professional. To avoid damaging the bed, it is important to use the right tools and follow the proper steps.

Do I need to remove the headboard and footboard?

Your Sleep Number bed’s model will determine how it works. Some models come with a headboard and footboard attached to the base, and others do not. If your bed has a headboard and footboard, you will need to remove them before disassembling the base.

Can I reuse the same screws and bolts when reassembling my Sleep Number bed?

When reassembling your Sleep Number bed, it is not recommended to reuse the same screws and bolts. Over time, screws and bolts can become stripped or damaged, compromising the stability of your bed. Reassembling your bed is best accomplished by using new screws and bolts.

Can I wash the mattress cover after disassembly?

Yes, most Sleep Number bed covers are machine washable. However, always check the care label.

Do I need to disassemble my Sleep Number bed when moving it to another room?

If you’re just moving it to another room, you might not need full disassembly. However, removing air chambers makes the task easier.

Is there a risk of damaging my bed during disassembly?

If you follow the steps carefully and handle components gently, the risk is minimal.

Can I hire professionals to disassemble my Sleep Number bed?

Yes, many moving companies offer services specifically for Sleep Number beds one of them is Vp Movers.

How long does it take to disassemble a Sleep Number bed?

Typically, with the right tools and following our guide, it should take about 1-2 hours.


Disassembling a Sleep Number bed may seem daunting, but if you follow the proper steps, it is not that difficult. With the right tools and a little patience, you can easily disassemble your Sleep Number bed. Please take your time and label each part correctly for easy reassembly. Contact a professional for assistance if you are unsure about disassembling your Sleep Number bed.

Rate this post
About Muhammad Talha

With over a decade of hands-on experience in the ever-evolving world of digital marketing, Muhammad Talha stands as a true luminary in the realm of SEO. As the visionary CEO of The Doers Firm, he has not only navigated but thrived in the dynamic landscape of search engine optimization.Muhammad's journey began with an insatiable curiosity about the inner workings of the internet. This youthful fascination quickly transformed into a career marked by relentless dedication and a thirst for knowledge. His early forays into the world of SEO were marked by late nights, countless experiments, and a determination to uncover the secrets of Google's algorithms.

Leave a Comment