Moving a Sleep Number Bed: A Comprehensive Guide

With our guide, you will learn everything you need to know about moving a Sleep Number bed. From disassembly to reassembly, we will guide you through each step so that you can confidently move your bed.

Introduction

The adjustable air chambers and modular design of Sleep Number beds make them an ideal choice for those seeking customized comfort and support while they sleep. It can, however, be challenging to move a Sleep Number bed from one location to another. When you do not have the proper guidance, disassembling and reassembling the bed can be overwhelming, and you run the risk of damaging it. This guide will provide you with a step-by-step guide to moving your Sleep Number bed, ensuring that it remains in top condition and ready for use in your new residence.

Preparing to Move

• The preparation for moving your Sleep Number bed requires careful planning and attention to detail. To begin the process, it is necessary to gather all the necessary tools and materials. The following tools will be required: pliers, a screwdriver, a rubber mallet, bubble wrap, blankets, or moving pads.
• You should have a clear plan in place before you begin disassembling your Sleep Number bed. Measure the new room to ensure that your bed will fit comfortably and that all the necessary outlets are accessible. Also, ensure that the path from your old home to your new one is free of obstacles, and that you have sufficient personnel to move the bed safely.
• Once you have established your plan, you can begin disassembling the bed. Remove all bedding and linens from the air chambers and deflate them. Next, unscrew the headboard and footboard from the frame. In addition, if your Sleep Number bed has a base, you should remove it as well. Remove the screws or bolts holding the base in place with your wrenches or pliers.
• After removing the base, you can disassemble the frame. Typically, the frame is held together with screws or bolts, so you will need to remove these with a screwdriver or wrench. Ensure that all the hardware is stored securely so that it can be easily reassembled in the future.
• The time has come for the individual components of the bed to be packed up. Protect the air chambers, frame, headboard, and footboard during transportation with bubble wrap or moving pads. If you need to reassemble the bed, you should clearly label each piece.

Packing and Transporting the Mattress

It is important to protect your Sleep Number bed’s mattress when packing and transporting it. Remove all bedding and linens, then wrap the mattress in a protective cover or plastic wrap. During transportation, this will prevent scratches and tears from occurring.

You can transport the mattress in a covered truck or trailer if you are moving locally. Secure it in place during transportation to prevent it from shifting. For long-distance moves, consider hiring a moving company that specializes in moving mattresses. As a result, they will be able to move your mattress in a safe and secure manner.

It is important to avoid bending or folding your Sleep Number mattress when transporting it. As a result, the air chambers may become damaged and the bed may become uncomfortable. For long-term storage, keep the mattress flat and do not place any heavy objects on top of it.

Packing and Transporting the Base

You should disassemble your Sleep Number bed’s base before packing and transporting it. Remove all hardware, such as screws or bolts, and store them in a safe place for reassembly at a later date. To prevent damage during transport, wrap each piece in moving pads or bubble wrap once it has been disassembled.

It is recommended that you use a covered truck or trailer when transporting the base. It is important to secure the pieces in place in order to prevent them from shifting during transport. Consider using a professional moving company that specializes in moving furniture if you are moving long distance.

When storing the base for an extended period of time, please ensure that it is kept in a dry, climate-controlled environment. The base should not be stacked with heavy items, as this may lead to damage.

Reassembling the Bed

• With a little patience and attention to detail, you can easily assemble your Sleep Number bed in your new home.
• First, unpack all the pieces and arrange them in the room where you wish to set up your bed. Follow the manufacturer’s instructions carefully when reassembling the frame. During the disassembly process, keep the screws and bolts in a safe location.
• Using the hardware provided by the manufacturer, reattach the base to the frame. Ensure that all screws and bolts are tightened to prevent the bed from wobbling or shaking.
• As soon as the base has been securely attached, it is time to reattach the headboard and footboard. Ensure that you follow the manufacturer’s instructions and use the screws or bolts that you saved during disassembly.
• After the frame has been reassembled and the headboard and footboard have been reattached, it is time for the air chambers to be inflated. The air chambers should be inflated in accordance with the instructions provided by the manufacturer. The air pump should be plugged in and functioning properly.
• Your newly reassembled Sleep Number bed is now ready for you to enjoy a good night’s sleep.

Common Mistakes to Avoid

When moving a Sleep Number bed, there are a few common mistakes that people make that can result in damage to the bed or even injury. Here are some mistakes to avoid:

1. Not disassembling the bed properly: 

Take time to disassemble the bed carefully and keep track of all hardware to make reassembly easier. You may damage the bed or injure yourself if you try to move it without disassembling it properly.

2. Not protecting the mattress and base: 

To prevent scratches and tears, it is important to wrap the mattress and base in protective covers or plastic wrap before transporting.

3. Storing the bed improperly: 

Be sure to store the bed in a dry, climate-controlled environment. Avoid stacking heavy objects on top of the mattress or base, as this may damage it.

4. Overinflating the air chambers: 

It is important not to overinflate the air chambers as this may place stress on the bed and may result in damage to the air chambers and pump. When inflating the air chambers, follow the manufacturer’s instructions carefully.

5. Rushing the reassembly process: 

Make sure to follow the manufacturer’s instructions carefully when reassembling the bed. Rushing the process can result in improper assembly, which may affect the bed’s comfort and safety.

Troubleshooting Tips

As much as Sleep Number beds are known for their comfort and durability, they may encounter problems from time to time. Here are some tips to help you address common problems with your Sleep Number bed:

1. Air pump not working: 

Check to see if the air pump is correctly plugged in and that the outlet is operating properly. If the pump still does not work, check the fuse or circuit breaker. If all of these things are working properly, the pump may need to be replaced.

2. Air chambers losing pressure: 

Check your air chambers for leaks by listening for hissing sounds or spraying them with soapy water to check for bubbles. If you find a leak, patch it using a Sleep Number patch kit or contact customer service.

3. Mattress sagging: 

Check that your mattress is properly supported by the base, and that the air chambers are inflated to the correct level of firmness. If the issue persists, it may be necessary to replace your mattress.

4. Remote not working: 

In the event that your remote is not working, please check the batteries and ensure they are properly installed.  In the event that the issue persists, please contact the customer service department.

5. Uneven firmness: 

Check that the air chambers are inflated evenly and that the mattress is properly supported by the base if one side of the bed feels firmer or softer than the other. In the event that the issue persists, please contact the customer service department.

Maintenance Tips

Keep the following maintenance tips in mind to ensure that your Sleep Number bed continues to provide you with the best possible sleep experience:

1. Clean the mattress cover regularly: 

As the mattress cover accumulates dirt, dust, and sweat over time, it should be removed and machine washed on a gentle cycle, using mild detergent and cold water, then tumble dried or left to air dry.

2. Clean the base: 

The base of your Sleep Number bed can accumulate dust and debris, so it is important to regularly wipe it down with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners as they can damage the base.

3. Inflate the air chambers regularly: 

You should inflate your Sleep Number bed’s air chambers every three to six months to maintain the desired level of firmness.

4. Rotate the mattress: 

Every six months, rotate the mattress 180 degrees to ensure even wear and prevent sagging. This will help to distribute body weight evenly across the mattress.

5. Protect the mattress: 

Consider using a mattress protector in order to prevent spills and stains from occurring. Your mattress will also last longer.

6. Check for leaks: 

The air chambers should be checked every few months for leaks by listening for hissing sounds or spraying them with soapy water to check for bubbles. If a leak is discovered, the leak should be repaired using a Sleep Number patch kit or contacted customer service for replacement.

FAQ’s

Conclusion

The process of moving a Sleep Number bed may seem daunting, but with proper preparation and care, it can be accomplished successfully. It is crucial to follow the steps for preparing the bed for moving, packing and transporting the mattress and base, reassembling the bed, and avoiding common mistakes when moving. Taking these troubleshooting and maintenance tips will help ensure that your Sleep Number bed will last for many years to come. If you take the time to properly move and maintain your Sleep Number bed, you will be able to enjoy a restful and comfortable night’s sleep for many years to come.